In order to design a new type of long-life and reliable casing hanger, this paper studied the failure mechanisms of the rubber sealing structures of the slip hanger and the mandrel hanger. Through tensile and compressive tests, the tests and analyses of different rubber structures were completed, data fitting was carried out, and the constitutive relationship of the rubber material was obtained. A superior constitutive model was applied to the sealing materials of the hanger. Numerical calculations were used to obtain the strength and sealing performance variation laws of the rubber sealing components with different structures, and the reasons for the failure of the conventional hanger were found. The results show that the rubber components and the ball-shaped metal sealing components will lose their elastic deformation under high-pressure and large-load conditions, and the reliability will decrease. Finally, a new type of metal sealing structure was designed. Compared with the previous metal sealing structures, this paper conducts a more in-depth and detailed study, and further presents the superiority of metal sealing in terms of structural dimensions and working principles. Experiments were conducted, and the results showed that this sealing structure can meet the usage requirements of the casing hanger with large loads and high pressure. The research results provide theoretical and application guidance for the design of long-life and reliable performance hanger sealing structures.
Zhang et al. (Mon,) studied this question.