Experimental and Numerical Study on Steel-Reinforced RCC and Binary- and Ternary-Blended Geopolymer Concrete Columns

This paper presents the numerical modeling and experimental testing of steel-reinforced columns composed of three types of concrete: reinforced cement concrete (RCC), geopolymer concrete (GPC), and geopolymer concrete incorporating quarry rock dust (GPCD). GPC columns were produced using fly ash (FA) and furnace slag (SG) in equal proportions (50% each), with the addition of 0.75% steel fibers by volume. In GPCD columns, 20% of SG was replaced with quarry rock dust (QRD). A total of twenty columns (200 mm × 200 mm × 1000 mm), designed for a compressive strength of 40 MPa (fc’), were tested under static loading. The experimental data were validated using finite element (FE) modeling in ABAQUS, where the Concrete Damaged Plasticity (CDP) model was adopted to describe concrete behavior. Calibration of the FE model for the control specimen was carried out by adjusting viscosity parameters, dilation angles, shape factors, plastic potential eccentricity, stress ratios, and mesh sizes. The calibrated control model was then employed for comparative analysis and validation against experimental results. For concentrically loaded columns, the predicted axial load and axial and lateral deflection responses closely matched the experimental observations. However, for eccentrically loaded columns, the FE model over-predicted the load-carrying capacity as well as axial and lateral deflections. The experimental findings indicate that both GPC and GPCD columns exhibited lower load-carrying capacities compared to RCC columns; however, the inclusion of steel fibers enhanced their performance. Overall, the proposed FE model demonstrated a good agreement with experimental observations, providing a reliable framework for predicting the structural behavior of geopolymer-based columns.