Rooftop photovoltaic (PV) potential assessments have advanced significantly through high-resolution geospatial methods. However, most studies remain focused on well-planned urban environments and primarily consider geometric or radiative factors, often neglecting material constraints and deployment realism in heterogeneous cities of the Global South. This study addresses these gaps by developing an automated LiDAR- and GIS-based methodology to estimate rooftop PV potential in Cartagena, Colombia, explicitly integrating cadastral constraints, geometric feasibility, and roof material exclusion. The workflow combines LiDAR-derived elevation data, parcel-based segmentation, slope and aspect filtering, and post-processing techniques to identify PV-suitable rooftops, validated against 482 manually delineated polygons. The optimal configuration (45° slope threshold; 0.25 m buffer) achieved RMSE values of 6.79° (slope) and 20.95° (aspect). A geometry-constrained panel fitting algorithm estimated 3,599,631 panels across 146,091 rooftops, representing 7.06 km2 of suitable area. Compared to simple area-based methods, this approach reduced capacity estimates by approximately 15.3%, demonstrating the importance of geometric realism. A key contribution is the integration of asbestos-cement (AC) roof exclusion, which reduced suitable rooftop area by ~65%, resulting in a final capacity of 1,281,202 panels. Estimated annual generation decreased from 1891.9 GWh/year to 673.4 GWh/year, equivalent to supplying 53.4–126.8% of Cartagena’s households. The proposed methodology provides a scalable framework for realistic urban PV assessment and introduces a dual-purpose planning tool that enables authorities to both prioritize solar deployment and identify areas requiring roof remediation, supporting safer and more controlled energy transitions in developing-country cities.
Castrillón-Ortíz et al. (Thu,) studied this question.