Cementitious materials prepared by the ice-templating method appear to have difficulty simultaneously possessing good mechanical properties and an oriented microstructure with microchannels. Surface micro-ceramicization of TiB2 and the decomposed products of cement hydrates at high temperatures can be regarded as in situ solid–solid reactions involving oxygen, thereby enhancing mechanical properties. This study investigates the mechanical property changes in cement paste with different water-to-cement ratios containing 25% TiB2 micron powder before and after high-temperature treatment. Cementitious samples are prepared using both freeze-casting (F-CAST) and regular casting (R-CAST) methods with and without the heating post-treatment. The average compressive strength of samples with a W/C of 0.65 prepared by the freeze-casting method at −60 °C with a heating post-treatment is much larger than that of samples prepared by the regular casting method with and without the same heating process. The freeze-casting process for preparing cementitious composites with TiB2 not only reorders the distribution of water molecules but also redistributes the concentrations of the TiB2 particles and the main hydrates in the frozen samples. Due to the concentration increase near ice crystal channels within the samples, led by the freeze concentration effect, the new products are formed and cover the channel surfaces after high-temperature treatment. This enhances both the overall and internal properties of the cement-based TiB2 composite material. The variation in TiB2 content within the specimens is of paramount importance.
Wang et al. (Sun,) studied this question.