In this study, a three-dimensional nonlinear finite element (FE) model was developed using Abaqus/Explicit to simulate the effects of internal blasts. The numerical model was validated against two previously published numerical and experimental works, demonstrating strong agreement in deformation results. A parametric study was carried out to evaluate the influence of several key factors on the deformation of the receiver tunnel subjected to an explosion in the adjacent donor tunnel. The investigation considered critical variables such as lining material, tunnel inner diameter, cross-sectional shape, spacing between tunnels, and TNT charge weight. The results clearly indicate that expanded polystyrene (EPS) foam, across various densities, demonstrates superior capacity for absorbing blast waves compared to polyurethane and aluminum foams. Furthermore, it was found that lower-density EPS foam provides enhanced mitigation of deformation in tunnel linings. The findings also revealed that damage to the tunnel walls is more strongly correlated with the tunnel shape where the circular tunnel exhibited the best performance. It showed the lowest deformation and delayed peak response. In addition, tunnel deformation increases markedly with higher TNT charge weights. A blast of 1814 kg produced approximately five times the deformation compared to a 454 kg charge. Moreover, it is seen that increasing the spacing between donor and receiver tunnels from 1.5 D to 2.5 D led to a 38.7% reduction in maximum deformation.
Nabil et al. (Mon,) studied this question.