Our heavy ion beams are slow, short, and thick. For such beams, spiral beam position monitors(BPMs) are expected to provide good linearity and multiple information readouts despite their small size. At the RIKEN Nishina Center, various ion beams are accelerated using linacs and cyclotrons. However, the beams handled are slow enough compared to relativistic speeds, the bunch length is only about the same as the electrode size, and the beam diameter may be close to the electrode spacing. Conventional “diagonal cut” or “cosine two-theta cut” (for quadratic moments) BPMs produce deviations in wave height*. To solve this problem, it is expected that the wave height deviation can be eliminated by cutting the electrode in a spiral shape. Furthermore, by cutting in a spiral shape, multiple cuts can be placed in one BPM, and it is expected that beam intensity, horizontal position, vertical position, and second moment can be read out at a single location. The performance shown by simulations of the spiral BPM and the development of a prototype will be presented.
Adachi et al. (Tue,) studied this question.