Against the backdrop of intensifying global population aging, lower-limb exoskeleton robots serve as core devices for rehabilitation and power assistance. Their control accuracy and motion smoothness rely on precise dynamic models. However, parameter uncertainties caused by variations in human lower limbs, assembly errors, and wear pose a critical bottleneck for accurate modeling. Aiming to achieve high-precision dynamic modeling for a two-degree-of-freedom lower-limb exoskeleton, this paper proposes a parameter identification method named Tent-GA-GWO. A dynamic model incorporating joint friction and link inertia was constructed and linearized. An excitation trajectory based on Fourier series, conforming to human physiological constraints, was designed. To enhance algorithm performance, Tent chaotic mapping was employed to optimize population initialization, a nonlinear control parameter was used to balance search behavior, and genetic algorithm operators were integrated to increase population diversity. Simulation results show that, compared to the traditional GWO algorithm, Tent-GA-GWO improved convergence efficiency by 32.1% and reduced the fitness value by 0.26%, demonstrating superior identification accuracy over algorithms such as GA and LIL-GWO. Validation on a physical prototype indicated a close agreement between the computed torque based on the identified parameters and the actual output torque, confirming the method’s effectiveness and engineering feasibility. This work provides support for precise control of exoskeletons.
Li et al. (Fri,) studied this question.