The precessing vortex core (PVC) is a major source of low-frequency harmful pressure pulsations that constrain the stable operating range of Francis turbines under part-load regimes. This study presents an experimental demonstration of active frequency control for the PVC in an aerodynamic turbine model (at Reynolds number 1.5 × 104), employing a resonant forcing strategy grounded in linear stability theory. Low-energy air injection with a momentum flux coefficient in the range of approximately 0.06% to 1.56% was applied via rotating actuators positioned within the flow region of highest receptivity. The core finding is the observation of frequency, where the PVC’s natural precession frequency synchronizes with that of the rotating actuator. A comparative analysis of actuator geometry revealed that a single-jet configuration achieves a significantly greater frequency shift, up to 22%, and a wider lock-in range than a dual-jet actuator (8% shift). This enhanced performance is attributed to the higher momentum flux density and more spatially coherent forcing generated by the single jet, which couples more effectively with the global instability mode. The results validate the successful adaptation of a highly efficient, physics-based control paradigm from reacting flows to hydraulic machinery, offering a promising approach to mitigate vortex-induced vibrations and expanding turbine operational flexibility.
Suslov et al. (Thu,) studied this question.