Vertical shafts are key channels for underground energy storage, mineral exploitation, and related engineering fields. Yet in deeply buried complex strata and high ground stress environments, traditional passive supports are prone to lining failure, while linear yield criteria cannot accurately characterize rock masses’ nonlinear mechanical behavior, limiting their use in shaft analysis. The core mechanical process of shaft construction aligns with the cavity contraction–expansion mechanism: excavation induces cavity unloading and contraction, causing shaft deformation and plastic zone expansion in surrounding rock; support enables cavity reverse expansion via preset shaft wall counter loads to actively control surrounding rock deformation. Based on this, this study integrates the Hoek–Brown nonlinear yield criterion, large-strain theory, and non-associated flow rules; couples cavity contraction–expansion semi-analytical solutions with the composite shaft wall mechanical model; and establishes a composite shaft wall–surrounding rock interaction analysis method. This research clarifies excavation-induced surrounding rock mechanical responses, reveals shaft wall counter loads’ regulatory effect on surrounding rock, and develops a systematic excavation support calculation workflow. Parameter analysis shows that increasing lining thickness is the most direct way to reduce inner wall tensile stress and improve safety; composite linings optimize stress distribution and enhance structural collaborative performance; and safety assessment confirms the lining inner wall as a structural weak zone. The proposed method and findings fill the gap in applying cavity contraction–expansion theory to shaft construction, providing reliable theoretical and practical guidance for deep shaft design, construction, and safety evaluation.
Deng et al. (Thu,) studied this question.