To address the high bending stresses and potential structural failure risks caused by differential settlement at expansion joints during bridge widening projects of straight bridges, this paper proposes an “Adaptive Rebound Displacement Compensation Device”. Existing research primarily focuses on analyzing settlement patterns and passive control standards, with limited attention to active dynamic regulation. Notably, the bending stress induced by new pier settlements can reach 3–5 times that of vehicle loads, posing serious safety concerns. Through theoretical derivation, this study clarifies the relationship between superstructure loss of strength and factors such as pier settlement, device stiffness, friction coefficient, and L-shaped baffle angle, and a comprehensive design framework is established accordingly. Combining numerical simulations, laboratory tests, and field measurements from engineering practices, multiple validation approaches are employed. The simulation results demonstrate that the proposed device can limit deck subsidence to 10–20% of pier settlement height, and experimental outcomes align closely with theoretical predictions. This device has been successfully implemented in a bridge widening project on a highway section in Jiangxi Province. It should be noted that all data presented in the paper are derived from finite element method (FEM) numerical simulations, and there are currently no on-site measurements of the device’s performance. FEM analysis indicates that the device demonstrates certain feasibility for practical engineering applications. Compared to scenarios without the installation of this device, bridge deck displacements can be reduced by approximately 16.5%. By enabling adaptive rebound through self-adjustment mechanisms for settlement compensation, this device significantly alleviates bending stresses at expansion joints, breaking through traditional passive control limitations. This study provides an innovative approach for actively controlling settlement differences in the widening of straight bridges, offering significant implications both at the theoretical and practical levels.
Rao et al. (Thu,) studied this question.