Performance diagnostics in alpine skiing increasingly rely on integrated biomechanical and kinematic assessments to support technique optimization under real training conditions; however, many existing approaches address trajectory geometry or biomechanical variables separately, limiting their explanatory power. This study evaluates an integrated analysis framework combining OptiPath, an AI-assisted video-based trajectory analysis tool, with XSensDOT wearable inertial sensors to identify technical inefficiencies during giant slalom skiing. Thirty competitive youth athletes (n = 30; 14–16 years) performed controlled runs with predefined lateral offsets from the gates, enabling systematic examination of the relationship between spatial trajectory deviations, biomechanical execution, and performance outcomes. Skier trajectories were extracted using computer vision-based methods, while lower-limb kinematics, trunk motion, and tri-axial acceleration were recorded using inertial measurement units. Deviations from mathematically defined ideal trajectories were quantified through regression-based calibration and arc-based modeling. The results show that although OptiPath reliably detected trajectory variations, shorter skiing paths did not consistently produce faster run times. Instead, superior performance was associated with more efficient biomechanical execution, reflected by coordinated trunk–lower limb motion, controlled vertical loading, reduced lateral corrections, and higher forward acceleration, even when longer trajectories were followed. These findings indicate that trajectory geometry alone is insufficient to explain performance outcomes and support the integration of wearable biomechanics with trajectory modeling as a practical, low-cost, and field-deployable tool for alpine skiing performance diagnostics.
Brus et al. (Wed,) studied this question.