To address image degradation in optical telescopes with fast focal ratios—a problem caused by the misalignment of optical elements during assembly and observation—this study proposes a high-precision calibration method for image quality detection and correction. The method substitutes parallel laser beams for starlight to generate the incident wavefront required for calibration. Low-order aberrations resulting from system misalignment are calculated from the centroid coordinate offsets of laser spots on defocused planes, thereby enabling feedback-controlled alignment adjustments. Simulations and experiments were conducted on a single parabolic mirror system with a diameter (D) of 500 mm and a focal ratio of F/3. The results indicate that for mirror tilt misalignments ranging from −2∘ to +2∘, the estimated error for the Zernike coefficients Z4–Z6 is below 0.1λ (λ=650 nm). This accuracy meets the alignment requirements for telescopes with fast focal ratios and eliminates the need for large flat mirrors and clear night skies, which are traditionally required for outdoor calibration. Consequently, the method provides a low-cost, high-precision solution for the real-time calibration of telescopes at remote sites, such as those in Antarctica.
Gao et al. (Thu,) studied this question.