Frequent extreme rainfall events in northwestern China have made loess–mudstone composite slopes highly susceptible to progressive failure, posing serious threats to infrastructure and public safety. This study investigates the deformation–failure mechanisms and evolutionary characteristics of such slopes under rainfall infiltration by integrating indoor physical model tests with long-term SBAS-InSAR time-series deformation monitoring. The physical model experiments reveal pronounced hydro-mechanical heterogeneity within the composite slope: surface fissures act as preferential flow paths, the mudstone interface exerts a significant water-blocking effect, and hydrological responses differ markedly between shallow and deep layers. The wetting front exhibits a distinct dual-layer migration pattern, characterized by rapid lateral expansion in the shallow layer and delayed advancement in the deep layer. Rainfall infiltration induces a progressive failure process, evolving from toe infiltration softening and mid-slope local erosion to differential crest erosion and ultimately overall sliding, forming a typical failure pattern of frontal creeping, central shearing, and rear tensile deformation. SBAS-InSAR results indicate that the natural landslide experienced a similar long-term progressive evolution, developing from shallow, localized deformation to deep-seated and slope-wide acceleration under multi-year rainfall. Despite differences in spatial deformation patterns influenced by natural microtopography, the failure stages and dominant deformation zones identified by both approaches show strong consistency. The combined results demonstrate that rainfall-induced suction decay, interface softening, pore water pressure accumulation, and stress redistribution jointly control the progressive instability of loess–mudstone slopes. This study highlights the effectiveness of integrating physical modeling and InSAR monitoring for elucidating rainfall-induced landslide mechanisms and provides scientific insights for hazard assessment and mitigation in composite-structure slopes.
Wei et al. (Thu,) studied this question.