Mineral oils are increasingly being replaced by plant-based insulating liquids, known as natural esters, because of their biodegradability and high fire safety characteristic. However, their wider use in high-voltage and unsealed transformer applications is still limited due to concerns about thermo-oxidative stability and the relatively limited long-term performance data available compared to mineral oils. This study investigates improving the oxidation stability of natural esters through nanotechnology. A canola-based insulating liquid was used as the base fluid and modified with TiO2 and SiO2 nanoparticles of different sizes. Nanoparticle concentrations ranged from 0.05 to 0.25 wt.%, while Span 80 (sorbitan monooleate, non-ionic surfactant) served as a surfactant to ensure uniform dispersion and long-term colloidal stability. The nanofluids were subjected to accelerated aging to evaluate oxidation resistance, and key properties such as acidity, viscosity, and dissipation factor were monitored throughout the process. Dielectric performance was assessed using AC breakdown voltage testing, with results interpreted through two-parameter Weibull statistics. The TiO2-based nanofluids demonstrated superior thermo-oxidative stability compared to both the base oil and the SiO2-modified samples. Formulations containing smaller TiO2 nanoparticles (5 nm) exhibited the lowest increases in viscosity, acid value, and dissipation factor, indicating strong resistance to degradation under thermal stress. In dielectric performance, SiO2 nanofluids reached 65.8 kV, while TiO2 nanofluids achieved a higher value of 72.4 kV, confirming their greater effectiveness. Although the nanoparticles are not biodegradable, their use at low concentrations significantly enhances the oxidative and dielectric stability of natural esters, helping extend fluid life and reduce dependence on petroleum-based insulating liquids.
Oparanti et al. (Thu,) studied this question.