In recent time, magnetically controlled shunt reactors are widely used in solving power quality problems. These reactors are designed to reduce system reactive power, control high super/special high voltage grid voltage, suppress power frequency, regulate overvoltage, eliminate generator excitation, dynamically compensate transmission line power charge, suppress secondary arc current, suppress system resonance. By using suitably designed silica plate core reactors at the input of the frequency converters in the electrical distribution system, the level of harmonic currents drawn from the electrical power distribution system can be reduced to certain rates. The core material, the air-gapped nature of the reactor core, and the sizing of the reactor have a great influence on the harmonic level of the current and its ability to reduce losses in the reactor. In this study, three reactors with different core materials and different air gap gaps are designed for a certain voltage value. Parametric analysis of the reactors designed to see the changes in inductance values depending on the load level has been made both theoretically and experimentally and using the Finite Element Method. As a result of the analysis, the inductance stability, losses and compliance of the reactors with the standards are presented. The reactor's magnetic circuit is modeled with ANSYS@Maxwell, realizing a solution based on this method. The magnetic circuit is simulated to see the behavior of the reactor. In addition, real-time verification of the designed alternating current reactor has been made. Optimum design was obtained by using different core materials and different core air-gaped tested experimentally. The effect of the air gap distance in the core on the magnetic field and inductance value was also obtained.
Can Yıldırım Ahmet (Sat,) studied this question.