The development of small‐scale wind turbines with composite materials continues to gain momentum due to their cost‐effectiveness, high energy conversion efficiency, and ease of deployment. Despite these advantages, such composite structures are susceptible to operational failures such as fiber rupture, matrix cracking, and delamination. This research introduces a comprehensive design and analysis methodology for a 30 kW‐class small wind turbine blade engineered for low noise and enhanced durability. The blade incorporates a sandwich composite structure, utilizing E‐glass, S‐glass, and carbon fiber face sheets combined with a balsa wood core to improve weight efficiency and mechanical stability. To determine the most effective structural configuration and understand potential failure modes, nine composite sandwich variants were analyzed, considering core and layer failure limits, fiber orientation, and laminate stress distribution. Finite element analysis (FEA) was applied to evaluate stress responses and deformation behavior under static loads. Among the configurations tested, the one employing epoxy S‐glass unidirectional face sheets with a multidirectional fiber layup exhibited the lowest peak stress and superior resistance to deformation. An experimental tensile test on dog‐bone specimens further supported the numerical outcomes, with the unidirectional carbon fiber sample achieving the highest tensile strength of approximately 92 MPa. The FEA results for the optimized configuration remained safely within this failure limit. This study establishes a robust, data‐driven framework for optimizing composite blade structures, ensuring both performance and structural integrity in small wind turbine applications.
Chowdhury et al. (Thu,) studied this question.