This study develops a conceptual framework for characterizing reservoir architecture in multi-component, discrete systems using pressure transient analysis (PTA), aimed at calibrating inflow geometry prior to full-field dynamic simulation for subsurface gas storage applications such as CO2 and hydrogen. A secondary objective is to identify variations in permeability over time by analyzing flow capacity trends and evaluating the dynamic influence of faults and fractures. The analysis is based on a gas-condensate field comprising seven wells and four zones (A, B, C, D), using integrated dynamic datasets including extended well tests (EWTs), mud loss, production logs, and production data. Detailed interpretation of PX-1’s EWT indicated delayed re-pressurization and persistent under-pressure, suggesting a compartmentalized or transient system with limited gas-in-place connectivity. Four reservoir architecture concepts were developed: (1) lithology-dominated inflow, (2) structurally controlled inflow, (3) discrete, weakly connected compartments, and (4) transient-dominated systems with tight matrix GIIP. These concepts informed four reservoir models: matrix-only (M), areal heterogeneity (A), sparse bodies (B), and sparse networks (S). Application of these models across other wells revealed consistent localized KH (permeability–thickness product) behavior, with all models fitting short-duration data comparably. However, only sparse drainage models (B/S) adequately matched PX-1’s EWT response. PTA results confirm that well tests constrain KH locally but provide limited insight into large-scale reservoir architecture. EWTs may reach ~1 km, while shorter tests are confined to ~200–400 m, typically within one to two simulation grid blocks. This study demonstrates how integrating PTA with multi-scale data improves characterization of naturally fractured, tight carbonate reservoirs and supports reservoir simulation and history matching for hydrogen storage evaluation. Based on reservoir simulations, this study concluded that naturally fractured carbonate gas reservoirs can provide significant storage and injection capacities for underground hydrogen storage. This study exemplifies how to characterize the naturally fractured tight carbonate reservoirs by integrating multi-scale and multi-dimensional data such as PTA. Furthermore, this study assists in gridding for full-field reservoir models, for history matching and quantifying the potential of hydrogen storage in these complex reservoirs. The proposed workflow provides an uncertainty-bounded reservoir characterization framework and should not be interpreted as a complete field-design methodology for hydrogen storage. The modeling does not explicitly couple geomechanical fracture growth, hydrogen diffusion, long-term geochemical reactions, or caprock integrity degradation. Therefore, the presented storage scenarios represent technically feasible cases under defined assumptions. Comprehensive site-specific geomechanical and containment assessments are required prior to field-scale implementation.
Hussain et al. (Thu,) studied this question.