Particle Flow Code (PFC) numerical simulations were adopted to simulate the mining process and the process of goaf collapse and to predict the residual subsidence of abandoned goafs in steeply inclined multi-seam coal mines, taking the No. 101 Coal Mine in the Xishan Mining Area of Urumqi, China, as an example. Scaled physical simulations were also employed to simulate the evolution of voids in the coal–rock mixture in the goaf. The results show that after mining, the roof of shallow coal seams becomes unstable and collapses in the anti-dip direction, causing the materials within the unconsolidated layer to fall and backfill the goaf, which further leads to ground subsidence. The mining of deep coal seams is also accompanied by the overall movement of overlying strata along the dip direction of the coal seams and surface subsidence. The content of voids within the broken coal–rock mass in the goaf tends to decrease with increasing pressure, showing a negative exponential correlation. Based on the observed relationship between displacement and void content obtained from the simulation experiments, it is inferred that the residual displacement under the current conditions of the study area accounts for approximately 10.5% of the total displacement. Combining the results of the PFC simulation and the evolution law of void content, the residual subsidence of the goaf in the study area since mine closure is predicted to range from 0 to 1 m, with a high-value zone distributed in the northeastern part of the study area. Deep goafs within the B7–B11–12 and B14–B18 coal seam groups mainly contribute to the residual subsidence. The distribution of goaf collapse pits, as revealed by field investigation, also verifies the reliability of the prediction results.
Wang et al. (Fri,) studied this question.