Solar energy, as a clean and renewable resource, plays a pivotal role in advancing sustainable energy technologies. The efficiency of front-side silver paste is critical for the photovoltaic performance of Tunnel Oxide Passivated Contact (TOPCon) solar cells. In this study, we comprehensively investigated how the composition of organic vehicles in conductive pastes influences both printing rheological properties and electrical performance. Through rheological characterization, contact angle measurements, and Three-Interval Thixotropy Tests (3ITT), we examined the effects of varying solvent, binder, and thixotropic agent ratios on paste properties. The optimized formulation—a solvent mixture of lauryl alcohol ester (TE), butyl carbitol (DGME), butyl carbitol acetate (BCA), and dibutyl phthalate (DBP) in a 3:4:2:1 ratio, with ethyl cellulose (EC) STD10 as the binder and a polyamide wax (PAW)–hydrogenated castor oil (HCO) thixotropic agent at a 3:1 mass ratio—demonstrated superior viscosity control and rapid structural recovery. Printed grid lines achieved a height-to-width ratio (H/W) of 0.35 and a sheet resistance (Rs) of 1.43 Ω/□. These findings reveal direct relationships between organic vehicle composition, paste rheology, and functional performance, providing practical guidance for the design and optimization of high-performance conductive pastes for c-Si solar cells. This work establishes a foundation for improving both the efficiency and reliability of next-generation silver paste formulations in photovoltaic applications.
Hou et al. (Fri,) studied this question.