In nature, structures such as earwig wings and mimosa leaves exhibit remarkable folding and unfolding capabilities. Inspired by these biological mechanisms, this work investigates soft foldable and torsional actuators based on Kresling crease pattern, fabricated using soft TPE 85A material through 3D printing. These actuators enable both foldable grasping and torsional motions. An analytical geometric model is developed to characterize the relationship between structural parameters and the inscribed circle area of a single-layer soft actuator, thereby elucidating their influence on contraction magnitude and relative deflection angle. Treating the soft actuator as an equivalent spring system, a mechanical model relating vacuum pressure to contraction ratio is further established, revealing an approximately linear relationship. The actuators are subsequently integrated with suction cups to form two end-effectors, a foldable soft gripper and a torsional soft gripper, and mounted onto a UR5 robotic arm via a customized flange. Demonstration experiments show that the foldable gripper achieves gentle, adaptive grasping of diverse objects, while the torsional gripper replicates human-like twisting motion, such as opening a bottle cap. This study highlights the potential of Kresling-based soft grippers for practical deployment in automated production tasks, including precision assembly and fruit harvesting.
E et al. (Sat,) studied this question.