Copper (Cu), silver (Ag), and copper–silver (Cu–Ag) powders were synthesized using ultrasonic spray pyrolysis (USP) combined with hydrogen-assisted reduction in order to examine how key processing parameters influence particle characteristics. The effects of reduction temperature, gas atmosphere, and precursor molar ratio on particle morphology, size distribution, and elemental composition were systematically investigated. Aqueous precursor solutions of copper nitrate trihydrate and silver nitrate were atomized in a USP reactor and thermally treated under hydrogen-containing or argon atmospheres at temperatures between 500 and 700 °C. The resulting powders were characterized by scanning electron microscopy (SEM), particle size analysis using ImageJ, and energy-dispersive X-ray spectroscopy (EDS). The results showed that both temperature and gas atmosphere strongly affected particle formation. Hydrogen-assisted synthesis promoted efficient reduction and high metal purity but was associated with increased particle coalescence, whereas argon atmospheres yielded finer and more uniform particles through thermally driven decomposition. In the case of Cu–Ag powders, the precursor molar ratio played a decisive role in particle stability. A 1:1 Cu:Ag ratio produced uniform particles with reduced susceptibility to surface oxidation, while Ag-rich compositions (1:3 Cu:Ag) showed increased agglomeration and partial oxidation after synthesis. Overall, this study demonstrates that careful adjustment of gas atmosphere, synthesis temperature, and precursor composition enables control over the morphology and compositional stability of Cu, Ag, and Cu–Ag powders produced by USP. These findings provide practical guidance for the scalable preparation of mono- and bimetallic metal powders for applications in electronics, catalysis, and energy-related technologies.
Faye et al. (Tue,) studied this question.