Three-dimensional (3D) woven composites have good impact resistance and are expected to become the fan casing material for the next generation of turbofan engines. Conducting research on the performance of woven composite plates under high-velocity impact of flaky projectiles is of great significance for the containment design of the fan casing. Based on the principle of energy conservation, an analytical model for the high-velocity impact of flaky projectiles on carbon fiber woven composite plates was established for three typical failure modes: shear plugging, fiber failure, and momentum transfer. A segmented solution method combining analytical and numerical calculations was developed for the model. The critical penetration velocity of the plate obtained by the analytical method at different roll angles of the projectile is in good agreement with the experimental results, which verifies the accuracy of the analytical model. Moreover, the analytical results indicate that the critical penetration velocity of the plate increases first and then decreases with the roll angle of the projectile. Further energy conversion analysis points out that shear plugging is the main form of energy dissipation for woven composite plates, and the energy dissipation of shear plugging at a roll angle of 30° is higher than that at 0° and 60°. This elucidates the mechanism by which the roll angle of the projectile affects the critical penetration velocity of the plate from the perspective of energy dissipation.
Hang et al. (Wed,) studied this question.