Valorization of Industrial Waste in Monoporosa Ceramic Tile Production

The ceramics industry has long embraced the principles of the circular economy, with a strong focus on the reuse and recovery of raw materials essential to the production cycle. This approach reduces costs by reintroducing secondary raw materials—such as production scraps and recycled materials—into the manufacturing process after appropriate recovery treatments. This study aims to contribute to the transition of the ceramic industry toward a circular economy by incorporating industrial by-products into monoporosa ceramic bodies, thereby transforming waste materials into valuable resources. Monoporosa is a porous, single-fired ceramic wall tile characterized by a high carbonate content and low bulk density. However, the role of secondary raw materials in monoporosa formulations, as well as their influence on processing behavior (e.g., during sintering) and on key technological properties, is not yet fully understood. This work investigates a standard monoporosa formulation based on conventional raw materials (sand, calcite, feldspars, and clays) and compares it with new formulations in which industrial waste materials from local and national sources—originating from other industrial processes—are used as partial or total substitutes for some of the traditional raw materials, particularly sand and calcite. The industrial by-products examined include biomass bottom ash, foundry sand, and marble cutting and processing sludge. All materials were characterized using chemical–mineralogical, thermal, and morphological analyses and were incorporated into the ceramic bodies at different substitution levels (10%, 50%, and 100%) to replace natural raw materials. Their behavior within the mixtures was evaluated to determine ceramic suitability and acceptable replacement ratios. Furthermore, the effects of these additions on water absorption, thermal expansion coefficient, and microstructural characteristics were assessed. Based on the positive results obtained, this study demonstrates the feasibility of using, in particular, two secondary raw materials—foundry sand and marble sludge—in monoporosa body formulations, allowing for the complete replacement of the original raw materials and thereby contributing to the development of more sustainable ceramic compositions.