This study experimentally investigated the ignition and combustion characteristics of marine gas oil as a pilot fuel in dual-fuel marine engines using a constant-volume combustion chamber. In-cylinder temperature, pressure, and injection duration were the primary experimental variables. Results showed that temperature is the dominant factor governing ignition delay: increasing temperature from 520 °C to 580 °C reduced ID by 46.7% and its standard deviation by 62.8%. Increasing pressure shortened ID by 24.5% and reduced variability by 28.8%. In contrast, injection duration minimally affected ignition timing but increased accumulated heat release and maximum heat release rate by 37% and 20%, respectively. The time interval between ID and main combustion delay remained constant at approximately 0.30 ms across all conditions, indicating simultaneous advancement of ignition and combustion development. These findings demonstrate that ignition timing control (via temperature management) and combustion intensity control (via injection quantity) can be independently optimized, providing fundamental experimental data for the development of robust combustion-control strategies in dual-fuel marine engines.
Kim et al. (Mon,) studied this question.