Non-orthogonal multiple access (NOMA) has been identified as one of the key technologies for 6G capacity and latency gains. However, existing implementation challenges of the NOMA technique, related to carrier, timing, and phase offsets, successive interference cancellation (SIC) error propagation, packet loss dynamics, and host to software defined radios processing jitter, create obstacles in the practical implementation of NOMA. This paper bridges the gap between theory and hardware by introducing a complete two-user NOMA transmit–receive chain on a low-cost ADALM-Pluto software defined radio (SDR) platform. The proposed implementation integrates matched filtering, offset estimation and correction, SIC with waveform reconstruction and subtraction, and reliability reinforcement via rate-1/2 convolutional coding with Viterbi decoding. We have performed a complete validation of the proposed design in both downlink and uplink modes. We collected data regarding the packet-level and system-related metrics, such as end-to-end latency, bit error rate (BER), and success rate. Moreover, we demonstrate the implementation of the uplink NOMA without need for expensive GPS-disciplined oscillators by leveraging the Pluto Rev-C dual-transmit channels that share a common oscillator. We present detailed experimental results at 915 MHz with BPSK modulation for the downlink performance, and also show a full implementation of the uplink NOMA. We observe excellent reliability for the downlink setup and good reliability for the uplink system.
Adhikary et al. (Mon,) studied this question.