A focus-control mechanism is essential for maintaining the optical performance of spaceborne telescopes, the mirror alignment of which is degraded by gravity release, moisture desorption, and thermal distortion in orbit. Achieving submicrometer-level drive accuracy is challenging because bearing deformation and bolted-joint hysteresis introduce nonlinear behavior, which must be addressed in ultraprecision mechanisms. In this study, the 1D Computer-Aided Engineering (1DCAE) approach was applied to the early-phase design of a spaceborne focus-control mechanism for developing practical design equations that accurately represent the stiffness and deformation characteristics of key components. Modification functions derived from finite element analysis (FEA) and the indirect fictitious boundary integral method (IFBIM) were incorporated into the equations for a linear guide, rectangular spring, and bearing deformation. These equations showed excellent agreement with analytical solutions, numerical simulations, and experimental data, achieving accuracies within 3% and 2.5% for the linear guide and rectangular spring, respectively, and close correspondence with the IFBIM-based bearing deformation reference values. Integrating the equations into the 1DCAE model enabled accurate prediction of the nonlinear drive characteristics of the mechanism and improved the overall drive accuracy to one-fortieth that of the initial design. In conclusion, 1DCAE provides an effective and computationally efficient framework for optimizing ultraprecision mechanisms used in space applications.
TABATA et al. (Mon,) studied this question.