Biarticular actuators can enhance efficiency and stability in legged locomotion by transferring energy between joints. Their effectiveness depends strongly on the lever arm ratio—the ratio of the actuator’s moment arm at one joint to its moment arm at another—which governs how torque is distributed across joints during movement. Inspired by biomechanics, early robotic studies implemented biarticular actuators to improve energy efficiency, joint coordination, and positional control, primarily in planar or single-joint systems, leaving a gap in fully 3D robotic legs. Here, we present a geometry optimization framework for a robotic leg incorporating both biarticular and monoarticular actuators. Using human motion capture and joint torque data, we optimized the linkage mechanisms so that the system can maintain the required joint torques while keeping biarticular actuator moment arm ratios near their optimal values during walking and running. The optimized leg achieved a minimum achievable cost of transport of approximately 0.41 J/(kg·m) for walking and 0.62 J/(kg·m) for running.
Sivak et al. (Tue,) studied this question.