The development of low-temperature, high-efficiency catalysts for the catalytic elimination of chlorinated volatile organic compounds (CVOCs) remains a significant challenge. Investigating the influence mechanism of catalyst physicochemical properties on chlorobenzene oxidation performance and degradation pathways is particularly important. CuO/WO3 catalysts were developed using a hydrothermal method in this work. The effects of simultaneous or separate addition of ammonium sulphate and ammonium persulphate on the catalytic performance of the CuO/WO3 series catalysts were investigated. The results showed that the introduction of ammonium sulphate alone can facilitate the formation of CuWO4, thereby increasing the chemisorbed oxygen concentration of the CuO/WO3, and making the overall structure of the catalyst looser and increasing the active sites on the catalyst surface. As the optimal catalyst, CuO/WO3-2 exhibited 55.9% of chlorobenzene conversion and 32.9% of CO2 selectivity at 500 °C. Interestingly, although the surface acidity in this work seemed to be one of the reasons for promoting the chlorobenzene oxidation, it could be clearly found that the strong solid acidity of WO3 was actually a key factor in inhibiting the chlorobenzene oxidation. Finally, based on in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis, the primary mechanism for chlorobenzene oxidation on CuO/WO3 catalysts proceeds through a sequential conversion: chlorobenzene was first transformed into phenolic intermediates, followed by quinone compounds, maleates, aldehydes, bidentate carbonates, and ultimately carbonate species.
Sun et al. (Tue,) studied this question.