Titanium dioxide (TiO2) nanotube arrays (NTAs) were constructed on Ti foil to immobilize Cu2ZnSnS4-TiO2 (CZTS-T/NTAs) via the sol–gel dip-coating technique. The films were characterized by X-ray diffraction (XRD) patterns, field-emission scanning electron microscope–energy dispersive spectroscopy (FESEM-EDX), ultraviolet–visible diffuse reflectance spectra (UV–Vis/DRS), and electrochemical impedance spectroscopy (EIS) techniques. The photocatalytic property of CZTS-T/NTAs was evaluated by the photodegradation of Basic Blue 41 under visible light irradiation. We show that CZTS-T/NTAs have an energy band gap of 2.23 eV, which leads to excellent potential trapping or facilitates the transition of charge carriers under visible light. The parameters R0 and C0 of the experimental EIS data, by fitting the proposed electrical circuit, were also discussed. Decreasing R0 led to an increase in cell capacitance, which resulted in increased carrier generation at the interface between the catalyst and solution and thus an increased photodegradation yield. The response surface methodology (RSM) and central composite rotatable design (CCRD) were used to optimize the effects of the experimental parameters in the degradation process by four key variables (pH, dye concentration, irradiation time, and hydrogen peroxide (H2O2) concentration). As a result, the optimized conditions attained a considerable degradation of 95.25%. We also proposed the possible photodegradation mechanism of the photocatalyst. Notably, the proposed catalyst after six consecutive reuse runs retained activity.
Abdulrahman et al. (Sat,) studied this question.