PID (proportional integral derivative) control has been widely used in industry due to its simplicity in implementation and satisfactory performance. However, the controller tuning is very troublesome when used in complex and nonlinear systems. The full bridge boost converter (FBBC) is a nonlinear system, so the PID control application in this converter should be further explored. This paper introduces a control approach that integrates PID control with a Linear Quadratic Regulator (LQR) for FBBC. To enable linear control design, the FBBC is linearized around its steady state operating points. The control architecture is structured into four cases: Case 1: PI-LQR Output Feedback, Case 2: PI-LQR State Feedback, Case 3: PID-LQR Output Feedback, and Case 4: PID-LQR State Feedback. The analysis aims to identify the most reliable system performance under input voltage change and load variation. The simulation results indicate that under the input voltage and load changes, cases 2 and 4 produce faster settling times, each with a settling time of 0.025 s and 0.015 s, respectively. However, both controllers produce negligible steady state error (less than 1%). Overall, Case 4 (PID-LQR State Feedback) consistently delivers the best performance, characterized by faster settling time, negligible steady state error, optimal control signal, and significantly reduced oscillation in both the inductor current and output voltage.
Wijanarko et al. (Fri,) studied this question.