Abstract This study presents the development of a 3D-printed, wideband, dual-polarized magneto-electric dipole antenna. The proposed antenna demonstrates exceptional cross-polarization isolation (XPI) between its two mutually orthogonal RF ports, achieved through innovative feeding probes, specifically an inverted -shape and a conventional -shape probe. The analysis reveals that misalignment between probes can impair XPI; this phenomenon is systematically examined through electromagnetic full-wave simulations. A practical remedy is provided using four plastic rods strategically positioned through the probes and posts. Measurements indicate that XPI exceeds 50 dB across the common operating frequency range of 3. 05–4. 13 GHz (30%). The maximum realized gain is approximately 7. 9 dBi, with a nearly flat response and stable radiation patterns across both ports throughout the bandwidth. The proposed antenna offers a cost-effective, 3D-printed design, wideband radiation performance, and exceptional port-to-port isolation, demonstrating significant potential for full-duplex wireless communication and ICAS applications.
Yurtoglu et al. (Mon,) studied this question.