Linear alkylbenzene (LAB) is the main raw material used to make biodegradable detergents, and its production process is based on aromatic alkylation. HY zeolites that have undergone controlled dealumination and desilication have led industrial standards amongst solid acid catalysts because of their controllable acidity and hierarchical pore structure. Coke formation in such systems can assume a dual role, which is dependent on its condition. Though the over-deposition is known to cause deactivation by blocking the micropores, Bronsted acid-site masking, and diffusion collapse, the low-level deposition could also be done to increase the monoalkylate selectivity by the pore mouth catalysis, steric modulation, and selective suppression of secondary alkylation pathways. The critical review is done on the structural-kinetic interaction that determines the coke evolution in HY-based catalysts. In order to moderate the acid-site density and enhance hydrothermal stability, dealumination (Si/Al optimization of about 2.5 to 30–100) occurs, but to reduce deep-pore coke formation, desilication (interconnected mesopores) is created. The bimodal porosity and regulated acidity are found to be synergistic, as hierarchical HY zeolites produced through successive cycles of steam and alkaline treatments not only show LAB selectivity in excess of 90% but also exhibit much longer catalyst lifetimes. Quantitative research on the beneficial coke regime revealed that it was composed of about 36 wt% hydrogen-rich species, which were localized at the pore mouths, hence enhancing monoalkylation selectivity by 15–40%. Beyond a critical transition window (e.g., 8–12 wt.%), coke formation to condensed polyaromatic and graphitic products leads to fast deactivated coke formation, which is due to percolation limits and transport-controlled kinetics. More advanced techniques of characterization of the coke, e.g., temperature-programmed oxidation (TPO), 27Al MAAS NMR, and UV-Raman spectroscopy, indicate how the coke is changed to highly structured graphitic deposits of high oxidation activation energy. Activity recovery of 85–98% is obtained in regeneration processes, including controlled oxidative calcination, microwave-based and plasma-based processes, and thermal management protocols, and it would be determined by the chemistry of the coke, its spatial distribution, and the regeneration protocols. This paper has developed a mechanistic coke control system by cross-tuning the acidity and development of an effective pore network, which led to a sustainable aromatic alkylation reaction with minimal activity loss, high selectivity, and long life.
Al-Shammari et al. (Wed,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: