Railway traffic monitoring requires robust detection technologies capable of operating reliably under real-world vibration and environmental conditions. In this work, we present the design and validation of an optical vibration sensor based on a Single-mode–Multimode–Single-mode (SMS) fiber structure for Light Rail Vehicle (LRV) detection. The sensing mechanism relies on multimodal interference in the multimode fiber (MMF), where rail-induced vibrations modify the guided mode distribution and, consequently, the transmitted optical intensity. The optical signal is converted to voltage and processed through an embedded acquisition system. Additionally, we conducted tests with freight trains and maintenance trains in order to evaluate the applicability of the sensor in other types of trains besides the LRV. We conducted laboratory experiments to assess mechanical stability, sensibility, and packaging strategies, followed by supervised field tests on an operational LRV line. The recorded time-domain signal exhibited clear modulation during train passage, and first-derivative and sliding-window variance analyses were applied to reliably identify vibration events, even in the presence of slow baseline drift. In addition, frequency-domain analysis was performed by applying the Fast Fourier Transform (FFT) to the measured signal, enabling the identification of characteristic low-frequency spectral components induced by train passage. A quantitative sensitivity assessment was further carried out by correlating the integrated spectral energy (0–12 Hz) with vehicle weight, yielding a linear response with a sensitivity of 0.0017 a.u./t and coefficient of determination R2=0.933. The proposed solution demonstrated stable operation using commercially available low-cost components, confirming the feasibility of SMS-based optical sensing for railway monitoring. These results indicate strong potential for future deployment in traffic safety systems and distributed sensing networks.
Oliveira et al. (Mon,) studied this question.