Advanced mobile communication standards of the fifth and subsequent generations widely use beamforming technology. While many publications on this topic rely on simulation tools, some work has been dedicated to experimental testing using software-defined radio (SDR) platforms. These platforms are often expensive and require significant expertise to configure. This paper proposes a novel cost-effective method for combining a pair of dual-channel Universal Software Radio Peripheral (USRP) B210 boards into a four-element antenna array direction of arrival estimation testbed using Metronom synchronization devices. The hardware and developed software implementation is detailed, including the antenna layout and software modules, based on USRP Hardware Driver, that provide the frequency and time synchronization necessary for amplitude-phase processing. Experimental validation of the testbed using the MUltiple SIgnal Classification (MUSIC) algorithm demonstrates high stability of angle of arrival estimates, with a standard deviation not exceeding 0.4°. The algorithm achieved a resolution of 16.1° for two sources, which surpasses the half-power beamwidth of 25.6°. The theoretical significance of this work lies in the scientific validation of combining SDR devices with the precise synchronization required for beamforming. Its practical value is in enabling the experimental testing of beamforming without the need for costly multichannel SDR hardware.
Sheremet et al. (Tue,) studied this question.