Rigorous calculations of the absolute diffraction efficiency η, performed earlier using two commercial computer solver based on electromagnetic methods, have shown that the maximum η of neutron gratings with sinusoidal and lamellar groove profiles can exceed known analytical limits. Thus, for a sinusoidal grating with a period of d = 50 μm, a groove depth of h = 53.4 nm at an incidence angle of θ = 89.72° (θc = 89.53°), η(−1) = 46.8% was obtained at a wavelength of λ = 1 nm, which is 38.5% higher than the maximum scalar efficiency. For a similar lamellar grating, η(−1) = 46.05% was obtained, which is 13.7% higher than the scalar one. In this work, for copper, one of the promising materials for cold neutron optics, not only gratings with sinusoidal and lamellar groove profiles were investigated, but also the most efficient gratings with a triangular profile (with blaze) were considered. For a grating with d = 50 μm and h = 41.1 nm, η(−1) = 79.2% was obtained for θ = 89.37° and λ = 1 nm. The data calculated using both codes with an accuracy of ~0.1% for the main diffraction orders of gratings of all groove profiles converge well and correspond to the estimates obtained using the phenomenological approach.
Goray et al. (Wed,) studied this question.