To investigate the strength evolution of concrete structures operating in long-term service in humid environments while facing threats such as earthquakes, explosions, and impacts, this study utilized a Hopkinson pressure bar (SHPB) and an MTS testing system to conduct experiments on concrete with four different moisture contents (relative saturation of 0%, 50%, 80%, and 100%) across a strain rate range of approximately 10−5 to 2 × 102 s−1. Based on these results, a relationship equation was established describing how the strength factor of wet concrete varies with strain rate. The study identified sensitive and non-sensitive regions for the strain rate effect in wet concrete. As the water content increases, the threshold for the sensitive region decreases. Specifically, the inflection strain rate for dried concrete is approximately 32 s−1, whereas for saturated concrete, it drops below 5 s−1. A functional equation describing the variation in the strain rate sensitivity coefficient with water content was derived, showing that the strain rate effect on strength becomes more pronounced as water content increases. The rate-wet coupling effect on concrete compressive strength was analyzed, and zones dominated by the strain rate strengthening effect and the water-weakening effect were identified. The mechanism of strength variation in wet concrete across different strain rate ranges was investigated. The analysis indicates that free water participates in the action processes of each mechanism from low to high strain rates. As the strain rate increases, the mechanisms of pore water interaction and thermal activation undergo a transition. At higher strain rates, the significant increase in the dynamic strength of wet concrete results from the combined and coupled effects of the material’s “true strain rate effect” and the stress wave effect in wet concrete, which are driven by the mutual coupling of pore water, thermal activation, and viscous drag mechanisms. This paper aims to provide a reference for the in-depth understanding of the strength evolution and control of hydraulic concrete structures.
Jiang et al. (Sun,) studied this question.