Accurate structural analysis is essential for the design and optimization of aircraft wings; however, repeated high-fidelity finite element analysis (FEA) becomes computationally expensive when embedded in iterative design loops. This study presents a machine learning-based surrogate modeling framework for the efficient analysis and optimization of metallic commercial wing structures. A detailed Airbus A320-like wing model was developed and analyzed in ANSYS 2023 R1 under modal, static, and eigenvalue buckling conditions. The general dimensions of the Airbus A320 wing were used only as a reference; the resulting model is a conceptual benchmark rather than a one-to-one geometric replica or a validated digital twin of a specific aircraft wing. Using Latin Hypercube Sampling, 340 high-fidelity samples were generated, with 300 samples used for training and validation and 40 retained as an independent holdout set. The proposed Pyramidal Deep Regression Network (PDRN), a deep learning-based surrogate model whose architecture is automatically tuned using Bayesian Optimization, was benchmarked against Artificial Neural Networks (ANNs), Ensemble Learning, Support Vector Regression (SVR), and Gaussian Process Regression (GPR). On the unseen test set, the PDRN achieved the best overall predictive performance, with RMS errors of 0.8% for mass, 3.1% for the first natural frequency, 11.5% for load factor, and 11.4% for safety factor. To evaluate its practical utility, the trained PDRN was embedded into a PSO-based optimization framework for mass minimization under minimum safety factor, load factor, and first-frequency constraints. The surrogate-guided optimum was verified in ANSYS and remained feasible, yielding a mass of 10,485 kg, a first natural frequency of 1.4142 Hz, a load factor of 1.307, and a safety factor of 1.158. Compared with direct ANSYS in-the-loop optimization, the proposed workflow reached a comparable feasible design with substantially fewer high-fidelity evaluations. These results demonstrate that the PDRN provides an accurate and computationally efficient surrogate for rapid wing analysis and constraint-driven structural optimization.
Kiyik et al. (Fri,) studied this question.