In this study, TiO2 nanoparticles (NPs), CdS NPs and TiO2/CdS nanocomposite were synthesized via the sol–gel, hydrothermal and ex situ method, respectively. The synthesized materials were characterized using XRD, UV–vis DRS, FTIR, SEM, and EDX analysis. XRD analysis confirmed the crystalline structure of the as-prepared samples, while the bandgap energy of TiO2 NPs, CdS NPs, and TiO2/CdS nanocomposite were determined to be 2.98, 1.94, and 2.27 eV, respectively. Photocatalytic efficiency of TiO2 NPs, CdS NPs, and TiO2/CdS nanocomposite was systematically evaluated by photocatalytic degradation of crystal violet (CV) dye under visible-light irradiation. Under optimized reaction conditions of CV concentration = 20 mg/L, catalyst dosage = 0.25 g/L, and pH = 6, TiO2/CdS nanocomposite achieved 86.3% removal of CV within 180 min, outperforming pure TiO2 NPs (16.4%) and CdS NPs (66.9%). The enhanced performance of TiO2/CdS nanocomposite as compared to CdS NPs is attributed to improved charge separation via heterojunction formation, while significantly superior performance over TiO2 demonstrates successful visible-light activation. Further optimization study revealed that maximum removal efficiency of CV (97.1%) was achieved at lower dye concentration (10 mg/L). Photocatalytic degradation of CV followed pseudo-first-order kinetics. Moreover, scavenger experiments confirmed hydroxyl radicals (•OH) as dominant reactive species. Furthermore, the TiO2/CdS nanocomposite demonstrated good reusability with minimal activity loss after five runs. Additionally, the as-prepared nanocomposites showed significant antibacterial activity against Pseudomonas aeruginosa (P. aeruginosa). The present study indicated that TiO2/CdS nanocomposite could be simultaneously used for degradation of organic pollutants as well as for removal of microorganisms while targeting environmental sustainability and water purification.
Ahmad et al. (Fri,) studied this question.