To enable non-destructive quantitative characterization of constituent content in C/C–SiC ceramic-matrix composites, this study develops a physics-guided framework based on multispectral photon-counting X-ray detection. In practical photon-counting measurements, multispectral attenuation features are jointly distorted by detector-response non-idealities, including charge sharing, K-escape, and finite energy resolution, as well as by beam-hardening effects from the polychromatic X-ray source. To address this coupled problem, a Geant4 11.2-based detector-response model was incorporated into a unified correction workflow together with beam-hardening compensation, so that physically consistent multispectral attenuation vectors could be recovered for subsequent constituent inversion rather than merely for spectrum restoration. On this basis, a fine-grained theoretical database covering different SiC mass fractions was established, and quantitative constituent inversion was achieved by matching the corrected attenuation features to the database. Experimental results show that the proposed framework effectively suppresses thickness-dependent bias in attenuation measurements and yields an average relative error below 3% for pure aluminum. For C/C–SiC composites, the SiC mass fraction can be quantified with an accuracy better than 3 wt%. These results demonstrate that the proposed method provides a practical non-destructive route for constituent-content characterization in heterogeneous ceramic-matrix composites and is valuable for manufacturing quality control and in-service assessment.
Yan et al. (Thu,) studied this question.