Key points are not available for this paper at this time.
Abstract Malaysian kenaf bast fiber was treated by acidic chlorite to be applied for a trunk polymer radiation‐induced graft copolymerization. The delignification conditions such as temperature, reaction time, and sodium chlorite (NaClO 2 ) loading were optimized from the viewpoints of density, tensile strength, and reactivity of grafting. It was found that delignification condition at 80°C for 6 h with 0.5% NaClO 2 gave 91% of lignin removal from the kenaf bast fibers. In this case, the density, fineness, and tensile strength of the kenaf fiber decreased about 46, 44, and 87%, respectively. Reactivity of grafting was evaluated using 4‐chloromethyl styrene to obtain widely available precursor materials. The partial delignified kenaf with residual lignin less than 2% resulted in degree of grafting of 134%, which is enough for precursor materials. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
Mohamed et al. (Thu,) studied this question.