Quercus suber bark, known as cork, is an important fire-adaptive trait of this Mediterranean species. However, the increased frequency of wildfires and poor forest management practices can be significant challenges in managing the sustainable exploitation of cork oak stands. This study evaluates cork’s thermal behavior and organoleptic quality for commercial applications under three experimental fire scenarios: prescribed burn, low-intensity wildfire, and high-intensity wildfire. Bench-scale tests were conducted using a vertical mass loss calorimeter to simulate heat exposure levels, measuring temperature changes at four cork depths and quantifying heat-induced damage. Morphological traits—cork thickness, corkback thickness, and relative humidity—were recorded as predictor variables. Additionally, organoleptic and aromatic analyses were performed to assess the suitability of fire-exposed cork for wine stopper production. Results were consistent with the available literature, confirming that cork thickness significantly reduces the maximum temperature at the phellogen level. Specifically, mean cork thickness showed a significant negative effect on Tmax4 (β = −0.02, p < 0.001), indicating a consistent decrease in internal temperatures with increasing thickness across all heat flux levels. By contrast, cork consumption (mass loss) was primarily driven by heat flux intensity rather than cork structural traits. Aromatic profiling and organoleptic analysis revealed the presence of smoke-related compounds in cork samples exhibiting external carbonization. This effect was observed under higher heat flux exposure (particularly at 25 and 50 kW m−2), where visible charring occurred. Under these conditions, commercial quality may be partially compromised, whereas samples without external carbonization did not show comparable aromatic alteration. Further field validation is recommended.
Esteban et al. (Tue,) studied this question.