A rapid quasi-one-dimensional (quasi-1D) reacting-flow analysis code was developed for the preliminary assessment of rocket-based combined cycle engines over a broad flight envelope. The internal flow was modeled as steady and quasi-1D in a variable-area duct by solving the coupled conservation equations together with species transport, and finite-rate chemical kinetics were included to represent combustion-induced heat release and composition change. To incorporate configuration-dependent mixing effects that affect RBCC heat release evolution and thermal choking tendencies, a streamwise mixing efficiency distribution was extracted from non-reacting 3D CFD and prescribed as an input to the quasi-1D formulation to represent the progressive availability of reactable fuel along the flowpath. A mode-dependent solution strategy was established by separating the computation into scramjet mode and ramjet mode procedures with a switching criterion based on whether a sonic condition occurs within the combustor, allowing thermal choking and mode transition behavior to be addressed within a single framework. The numerical solver was implemented in Python 3.12.2 and integrated using a stiff ordinary differential equation (ODE) scheme to ensure robust convergence in the presence of reaction-induced stiffness. Verification against previously published hydrogen-fueled scramjet results reproduced the overall streamwise trends of key quantities including Mach number, pressure, temperature, and density. The developed code was then applied to an RBCC configuration under operating conditions representative of ERJ and ESJ regimes, and the quasi-1D predictions were compared with cross-section-averaged 3D RANS CFD results, showing consistent mode identification and comparable axial behavior at a level suitable for preliminary analysis with substantially reduced computational cost.
Park et al. (Fri,) studied this question.