Urban stormwater runoff often contains toxic metals that threaten aquatic environments. Meanwhile, the large quantities of drinking water treatment residuals (DWTRs) generated worldwide offer opportunities for sustainable reuse as pollutant removal materials. In this study, a manganese sand-modified drinking water treatment residual particle (RDP-M) was prepared from DWTRs and manganese sand for Pb(II) removal from water. Characterization by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) showed that RDP-M had a rough surface morphology and abundant oxygen-containing functional groups, which provided adsorption sites. Batch experiments showed that the maximum Pb(II) adsorption capacity of RDP-M reached 2.79 mg g−1 at 298 K and pH 7.0, which was about 48% higher than that of the unmodified particles (RDP). The adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model, indicating a chemisorption-dominated process. Thermodynamic analysis further showed that the process was spontaneous and exothermic. RDP-M maintained stable Pb(II) removal over a wide pH range, showed low sensitivity to coexisting ions, and retained high efficiency during repeated use. These results demonstrate that RDP-M has potential as a sustainable granular material for stormwater treatment and waste resource valorization.
Du et al. (Tue,) studied this question.