Natural gas reservoirs characterized by high heterogeneity and containing bottom-bound water often face the problem of water intrusion, making it difficult to recover the recoverable gas. This paper addresses the issue of enhanced gas recovery in water-flooded reservoirs and, through high-temperature, high-pressure long-core displacement experiments, investigates the displacement effects of different reservoir properties and injection media (dry gas, N2, CO2) under simulated water-flooding conditions. The experiment utilized two sets of sandstone cores—one with moderate permeability (304.8 mD) and one with high permeability (1004.6 mD). Three cores from each set were spliced together to form a 0.9 m long core, simulating the gas injection and displacement process following water infiltration. The results indicate that while water intrusion occurs more rapidly in high-permeability reservoirs, gas injection yields better recovery results than in medium-permeability reservoirs. Among the three injection media, dry gas demonstrated the best displacement efficiency, followed by N2, with CO2 performing the worst. CO2 tends to react with highly mineralized formation water under high-temperature and high-pressure conditions, forming precipitates and causing energy to be absorbed by the water, which reduces displacement efficiency. It is recommended that dry gas injection be used for enhanced recovery in the moderate-permeability reservoirs of the Y gas field, while N2 injection may be considered for the high-permeability reservoirs to balance effectiveness and cost. The research results provide experimental support for subsequent gas injection to enhance gas recovery in this gas field.
Hu et al. (Wed,) studied this question.