To address the technical challenges of difficult deduction, limited field measurement, and ambiguous instability determination of roof separation critical values in mining roadways within the weakly cemented coal-bearing strata of Xinjiang, this paper proposes a discrete element method that integrates the fracture of anchor bolt and anchor cable support materials with the damage degree of the surrounding rock. Taking a specific mine in the Hosh Tolgay coalfield as the research object, a systematic study was conducted. The research process was as follows. (1) Model parameter calibration was performed. Intact rock parameters were obtained through laboratory basic mechanical tests, and rock mass parameters were corrected based on reduction empirical formulas and the Hoek–Brown criterion. Numerical model verification showed that the errors between the simulated and theoretical values of the elastic modulus, compressive strength, and tensile strength of the rock mass were all less than 10%, indicating that the corrected parameters are reasonable. (2) The critical damage values of the rock mass considering a non-constant confining pressure environment were proposed. Through triaxial compression simulations, the differential evolution patterns of rapid damage increase in sandy mudstone under low confining pressure and stable damage accumulation in coal were revealed, thereby clarifying the damage thresholds for rock mass instability under different confining pressures. (3) A large-scale model was established to analyze the evolution laws of the fracture field, support field, and displacement field of the roadway surrounding rock. A comprehensive determination method for the instability of the roof anchored bearing structure was proposed. By comparing the damage thresholds of the scaled rock mass and the roadway surrounding rock and analyzing the fracture conditions of the roadway support system, a dual-criterion consisting of surrounding rock damage and support material fracture was constructed. Based on this criterion theory, the critical values for deep and shallow separation were obtained. The research results indicate that the evolution patterns of damage in coal and sandy mudstone differ with confining pressure. The sandy mudstone layers in the shallow part of the roof are more sensitive to mining-induced unloading disturbances. Consequently, the surrounding rock damage and support fracture of the mine roof exhibit distinct distribution characteristics: the dominant failure of the roadway is shear failure, with wide-range coalescence of shallow fractures and gradual development of deep fractures, alongside the concentrated failure of shallow anchor bolts and partial failure of deep anchor cables. Based on the instability state of the roof monitoring zones, the critical value for shallow separation was determined to be 90.7 mm, and the critical value for deep separation was 129.03 mm. These results are very close to the field measured values, verifying the engineering applicability of the method. This paper reveals the damage characteristics of the rock mass and surrounding rock in weakly cemented strata, as well as the mechanism of roof separation initiation and evolution. The proposed method for determining critical values provides a scientific and feasible practical reference for the support optimization and monitoring and early warning of roadway roofs in weakly cemented strata, possessing significant engineering value for ensuring safe and efficient mine production.
Liu et al. (Thu,) studied this question.