To address the problems of insufficient precision reserve, limited rotational speed, and excessive temperature rise in high-speed ultra-precision machine tool spindle bearings, the influence of frictional power loss on the thermo-mechanical behavior of the bearing system was investigated. Firstly, based on the analysis of the heat source of the bearing, the friction power consumption model of the bearing assembly is established, and the analysis of the bearing temperature field is realized by studying the heat energy transfer. Secondly, the test bench is built for experimental verification. Finally, through the study of thermal-mechanical coupling performance, the influence of different rotational speeds on bearing stress and life is analyzed. The results show that the friction power consumption generated by the spin sliding of the bearing rolling element accounts for the largest proportion, accounting for 31% of the total friction power consumption; the increase in bearing speed will increase the bearing temperature. At 55,000 r/min, the highest temperature at the rolling element is close to 75 °C, followed by the inner ring up to 68 °C, and the lowest outer ring temperature is 57 °C. The temperature has a great influence on the bearing performance. Under the same working conditions, the equivalent stress is increased by 21%, the contact pressure is increased by 25%, and the fatigue life of the bearing is reduced by 5.6%. Bearing performance is significantly affected by thermodynamic behavior.
Tian et al. (Thu,) studied this question.