Many numerical studies validate droplet–wall impact using only maximum spreading diameter, yet this metric alone cannot ensure correct droplet dynamics. We present a combined dynamic contact angle model that merges the geometric accuracy of the generalized Hoffman–Voinov–Tanner (HVT) law with the kinematic consistency of a Hoffman function-based approach, improving predictions of droplet spreading and receding. We simulate water–glycerol droplet impact on sapphire glass at Weber numbers 20–250 and assess both contact angle formulations. Simulated radial velocity fields are processed in Python using SciPy and compared with particle image velocimetry measurements in the longitudinal section of the spreading droplet. The Hoffman function-based model captures the main droplet kinematic trends and provides more consistent receding dynamics. The generalized HVT law matches the maximum spreading diameter within 7%. However, during receding, it shows a median absolute error in radial velocity up to three times higher than that of the Hoffman function-based solution. Average radial velocity and spreading velocity can differ from experimental trends even when maximum spreading is reproduced. These findings support validation combining geometric and kinematic metrics and motivate the combined model for predicting spreading and receding. Using the maximum spreading factor βmax as the ratio of the maximum spreading diameter over the initial droplet diameter and the characteristic capillary number Cachar defined from the mean internal horizontal velocity at 300 μ m above the substrate, we introduce a (βmax, Cachar) diagram to relate spreading characteristics to internal flow dynamics. We hypothesize that, given sufficient data, the contact-line geometry may be used to estimate internal kinematics.
Zharikov et al. (Wed,) studied this question.