Conductive hydrogels are attractive for flexible electronics, but their practical use is often limited by resistance drift during repeated deformation and performance degradation at low temperatures. Here, core–shell polyaniline-coated polyacrylonitrile (PANi@PAN) electrospun nanofibers were incorporated into a polyacrylamide/hydroxypropyl cellulose (PAM/HPC) hydrogel matrix to construct a hybrid conductive network. The PANi shell serves as an electronic pathway alongside ionic conduction in the hydrated polymer network, leading to markedly improved electromechanical stability. The resistance drift is about 11% after 2000 stretching–relaxation cycles at 0–100% strain, about 12 times lower than that of the nanofiber-free hydrogel. Stable electrical responses are maintained under large deformation, with a resistance drift as low as 3.3% over a strain range of 0–400%. The hydrogels show a conductivity of 0.32 S m−1 while retaining high stretchability (>600%). An ethylene glycol/water binary solvent is used to suppress ice formation and improve moisture retention, allowing stable electromechanical performance at −15 °C over 500 cycles. The hydrogel also adheres reliably to human skin (about 10.25 kPa) and functions as a conformal strain sensor without extra fixation.
Chen et al. (Fri,) studied this question.