Piezo-enhanced photocatalysis is progressively considered an eco-friendly technology for contaminant removal, harvesting not only solar energy but also mechanical vibrations found in nature. Multiferroic materials present a coupled effect of various properties and can potentially increase the applicability of this process. In this study, Cr- doped bismuth ferrite thin film was deposited on SrTiO3 substrate by HiPIMS, and its photo-, piezo-, and piezo-photocatalytic efficiencies in Rhodamine B (RhB) degradation were analyzed. The highest removal percentage was found under the simultaneous exposure of visible light and mechanical vibrations, reaching 86.2% after 180 min. The calculated efficiencies for photo- and piezocatalysis were 12.2% and 83.7%, respectively. The rate constant (k) for piezo-photocatalysis was 16.1 times higher than that found during photocatalytic experiments. To assess the contribution of each reactive species to the decomposition process, different reagents were added to the Rhodamine B contaminated solution. The results revealed that when p-benzoquinone was used, the degradation efficiency declined significantly from 86.2% to 37.6%, suggesting that superoxide radicals (O2•−) play a key role in decomposing RhB molecules. The structural, chemical, optical, and ferroelectric changes caused by the catalytic processes were analyzed and linked to the proposed degradation mechanisms. The poor photocatalytic efficiency was linked to an improper band structure and an improper polarization orientation of the ferroelectric domains in the as-deposited film. The degradation mechanisms in piezo-photocatalysis were driven partly by the band bending caused by mechanical vibrations and partly by the reorientation of the induced polarization of the domains in the unstrained film.
Jijie et al. (Sat,) studied this question.