This article concerns the issue of contactless estimation of the complex electrical permittivity of masonry materials by means of a microwave technique in the frequency domain. The main aim of the study was to develop a method enabling the determination of the real part of relative permittivity and the electrical conductivity of ceramic building materials using microwave reflection measurements, as well as to assess the applicability of the proposed approach for moisture diagnostics in porous media. The research was performed using a reflection-mode measuring setup comprising a vector network analyser and a broadband horn antenna, while measurements were carried out in the frequency range from 1 to 6 GHz on samples of solid ceramic brick with six gravimetric moisture levels. A one-dimensional model of electromagnetic wave propagation in the material was developed, considering complex permittivity, impedance transformation, and a calibration procedure compensating for the influence of the antenna and free-space propagation. Based on the fitting of the magnitude and phase characteristics of the reflection coefficient, the electrical parameters of the tested samples were estimated. The results obtained showed an increase in both permittivity and conductivity with increasing moisture content and revealed very good agreement with the reference values determined using the time-domain method. It can be concluded that the frequency-domain microwave approach may be effectively applied for contactless and non-destructive diagnostics and estimation of the dielectric properties and moisture content in ceramic materials.
Szczepaniak et al. (Sun,) studied this question.